Plugin Data AiCommunityScripts: yesExternal requests: yesTelemetry: yes

Claude Mem

Auto-captures sessions, compresses with AI, and injects context into future sessions

thedotmackAdded Jan 7, 2026

Catalog skill by thedotmack: Auto-captures sessions, compresses with AI, and injects context into future sessions Install into Cursor, Claude, Codex, or VS Code from this page or review the source for Claude Mem.

Add to Cursor Add to VS Code Add to Claude Add to Codex View source

Ads

Installation

/plugin install claude-mem

Install guides: Cursor skills, Claude Code skills, Codex skills, or VS Code Copilot skills.

Skill body

Claude-Mem OpenClaw Plugin — Setup Guide

This guide walks through setting up the claude-mem plugin on an OpenClaw gateway. By the end, your agents will have persistent memory across sessions via system prompt context injection, and optionally a real-time observation feed streaming to a messaging channel.

Quick Install (Recommended)

Run this one-liner to install everything automatically:

curl -fsSL https://install.cmem.ai/openclaw.sh | bash

The installer handles dependency checks (Bun, uv), plugin installation, memory slot configuration, AI provider setup, worker startup, and optional observation feed configuration — all interactively.

Install with options

Pre-select your AI provider and API key to skip interactive prompts:

curl -fsSL https://install.cmem.ai/openclaw.sh | bash -s -- --provider=gemini --api-key=YOUR_KEY

For fully unattended installation (defaults to Claude Max Plan, skips observation feed):

curl -fsSL https://install.cmem.ai/openclaw.sh | bash -s -- --non-interactive

To upgrade an existing installation (preserves settings, updates plugin):

curl -fsSL https://install.cmem.ai/openclaw.sh | bash -s -- --upgrade

After installation, skip to Step 4: Restart the Gateway and Verify to confirm everything is working.

Manual Setup

The steps below are for manual installation if you prefer not to use the automated installer, or need to troubleshoot individual steps.

Step 1: Clone the Claude-Mem Repo

First, clone the claude-mem repository to a location accessible by your OpenClaw gateway. This gives you the worker service source and the plugin code.

cd /opt  # or wherever you want to keep it
git clone https://github.com/thedotmack/claude-mem.git
cd claude-mem
npm install
npm run build

You'll need bun installed for the worker service. If you don't have it:

curl -fsSL https://bun.sh/install | bash

Step 2: Get the Worker Running

The claude-mem worker is an HTTP service on port 37777. It stores observations, generates summaries, and serves the context timeline. The plugin talks to it over HTTP — it doesn't matter where the worker is running, just that it's reachable on localhost:37777.

Check if it's already running

If this machine also runs Claude Code with claude-mem installed, the worker may already be running:

curl http://localhost:37777/api/health

Got {"status":"ok"}? The worker is already running. Skip to Step 3.

Got connection refused or no response? The worker isn't running. Continue below.

If Claude Code has claude-mem installed

If claude-mem is installed as a Claude Code plugin (at ~/.claude/plugins/marketplaces/thedotmack/), start the worker from that installation:

cd ~/.claude/plugins/marketplaces/thedotmack
npm run worker:restart

Verify:

curl http://localhost:37777/api/health

Got {"status":"ok"}? You're set. Skip to Step 3.

Still not working? Check npm run worker:status for error details, or check that bun is installed and on your PATH.

If there's no Claude Code installation

Run the worker from the cloned repo:

cd /opt/claude-mem  # wherever you cloned it
npm run worker:start

Verify:

curl http://localhost:37777/api/health

Got {"status":"ok"}? You're set. Move to Step 3.

Still not working? Debug steps:

Check that bun is installed: bun --version
Check the worker status: npm run worker:status
Check if something else is using port 37777: lsof -i :37777
Check logs: npm run worker:logs (if available)
Try running it directly to see errors: bun plugin/scripts/worker-service.cjs start

Step 3: Add the Plugin to Your Gateway

Add the claude-mem plugin to your OpenClaw gateway configuration:

{
  "plugins": {
    "claude-mem": {
      "enabled": true,
      "config": {
        "project": "my-project",
        "syncMemoryFile": true,
        "workerPort": 37777
      }
    }
  }
}

Config fields explained

project (string, default: "openclaw") — The project name that scopes all observations in the memory database. Use a unique name per gateway/use-case so observations don't mix. For example, if this gateway runs a coding bot, use "coding-bot".
syncMemoryFile (boolean, default: true) — When enabled, the plugin injects the observation timeline into each agent's system prompt via the before_prompt_build hook. This gives agents cross-session context without writing to MEMORY.md. Set to false to disable context injection entirely (observations are still recorded).
syncMemoryFileExclude (string[], default: []) — Agent IDs excluded from automatic context injection. Useful for agents that curate their own memory. Observations are still recorded for excluded agents.
workerPort (number, default: 37777) — The port where the claude-mem worker service is listening. Only change this if you configured the worker to use a different port.

Step 4: Restart the Gateway and Verify

Restart your OpenClaw gateway so it picks up the new plugin configuration. After restart, check the gateway logs for:

[claude-mem] OpenClaw plugin loaded — v1.0.0 (worker: 127.0.0.1:37777)

If you see this, the plugin is loaded. You can also verify by running /claude_mem_status in any OpenClaw chat:

Claude-Mem Worker Status
Status: ok
Port: 37777
Active sessions: 0
Observation feed: disconnected

The observation feed shows disconnected because we haven't configured it yet. That's next.

Step 5: Verify Observations Are Being Recorded

Have an agent do some work. The plugin automatically records observations through these OpenClaw events:

before_agent_start — Initializes a claude-mem session when the agent starts
before_prompt_build — Injects the observation timeline into the agent's system prompt (cached for 60s)
tool_result_persist — Records each tool use (Read, Write, Bash, etc.) as an observation
agent_end — Summarizes the session and marks it complete

All of this happens automatically. No additional configuration needed.

To verify it's working, check the worker's viewer UI at http://localhost:37777 to see observations appearing after the agent runs.

You can also check the worker's viewer UI at http://localhost:37777 to see observations appearing in real time.

Step 6: Set Up the Observation Feed (Streaming to a Channel)

The observation feed connects to the claude-mem worker's SSE (Server-Sent Events) stream and forwards every new observation to a messaging channel in real time. Your agents learn things, and you see them learning in your Telegram/Discord/Slack/etc.

What you'll see

Every time claude-mem creates a new observation from your agent's tool usage, a message like this appears in your channel:

🧠 Claude-Mem Observation
**Implemented retry logic for API client**
Added exponential backoff with configurable max retries to handle transient failures

Pick your channel

You need two things:

Channel type — Must match a channel plugin already running on your OpenClaw gateway
Target ID — The chat/channel/user ID where messages go

Channel type: telegram

To find your chat ID:

Message @userinfobot on Telegram — https://t.me/userinfobot
It replies with your numeric chat ID (e.g., 123456789)
For group chats, the ID is negative (e.g., -1001234567890)

"observationFeed": {
  "enabled": true,
  "channel": "telegram",
  "to": "123456789"
}

Discord

Channel type: discord

To find your channel ID:

Enable Developer Mode in Discord: Settings → Advanced → Developer Mode
Right-click the target channel → Copy Channel ID

"observationFeed": {
  "enabled": true,
  "channel": "discord",
  "to": "1234567890123456789"
}

Slack

Channel type: slack

To find your channel ID (not the channel name):

Open the channel in Slack
Click the channel name at the top
Scroll to the bottom of the channel details — the ID looks like C01ABC2DEFG

"observationFeed": {
  "enabled": true,
  "channel": "slack",
  "to": "C01ABC2DEFG"
}

Signal

Channel type: signal

Use the phone number or group ID configured in your OpenClaw gateway's Signal plugin.

"observationFeed": {
  "enabled": true,
  "channel": "signal",
  "to": "+1234567890"
}

Channel type: whatsapp

Use the phone number or group JID configured in your OpenClaw gateway's WhatsApp plugin.

"observationFeed": {
  "enabled": true,
  "channel": "whatsapp",
  "to": "+1234567890"
}

LINE

Channel type: line

Use the user ID or group ID from the LINE Developer Console.

"observationFeed": {
  "enabled": true,
  "channel": "line",
  "to": "U1234567890abcdef"
}

Add it to your config

Your complete plugin config should now look like this (using Telegram as an example):

{
  "plugins": {
    "claude-mem": {
      "enabled": true,
      "config": {
        "project": "my-project",
        "syncMemoryFile": true,
        "workerPort": 37777,
        "observationFeed": {
          "enabled": true,
          "channel": "telegram",
          "to": "123456789"
        }
      }
    }
  }
}

Restart and verify

Restart the gateway. Check the logs for these three lines in order:

[claude-mem] Observation feed starting — channel: telegram, target: 123456789
[claude-mem] Connecting to SSE stream at http://localhost:37777/stream
[claude-mem] Connected to SSE stream

Then run /claude_mem_feed in any OpenClaw chat:

Claude-Mem Observation Feed
Enabled: yes
Channel: telegram
Target: 123456789
Connection: connected

If Connection shows connected, you're done. Have an agent do some work and watch observations stream to your channel.

Commands Reference

The plugin registers two commands:

/claude_mem_status

Reports worker health and current session state.

/claude_mem_status

Output:

Claude-Mem Worker Status
Status: ok
Port: 37777
Active sessions: 2
Observation feed: connected

/claude_mem_feed

Shows observation feed status. Accepts optional on/off argument.

/claude_mem_feed          — show status
/claude_mem_feed on       — request enable (update config to persist)
/claude_mem_feed off      — request disable (update config to persist)

How It All Works

OpenClaw Gateway
  │
  ├── before_agent_start ───→ Init session
  ├── before_prompt_build ──→ Inject context into system prompt
  ├── tool_result_persist ──→ Record observation
  ├── agent_end ────────────→ Summarize + Complete session
  └── gateway_start ────────→ Reset session tracking + context cache
                    │
                    ▼
         Claude-Mem Worker (localhost:37777)
           ├── POST /api/sessions/init
           ├── POST /api/sessions/observations
           ├── POST /api/sessions/summarize
           ├── POST /api/sessions/complete
           ├── GET  /api/context/inject ──→ System prompt context
           └── GET  /stream ─────────────→ SSE → Messaging channels

System prompt context injection

The plugin injects the observation timeline into each agent's system prompt via the before_prompt_build hook. The content comes from the worker's GET /api/context/inject endpoint. Context is cached for 60 seconds per project to avoid re-fetching on every LLM turn. The cache is cleared on gateway restart.

This keeps MEMORY.md under the agent's control for curated long-term memory, while the observation timeline is delivered through the system prompt.

Observation recording

Every tool use (Read, Write, Bash, etc.) is sent to the claude-mem worker as an observation. The worker's AI agent processes it into a structured observation with title, subtitle, facts, concepts, and narrative. Tools prefixed with memory_ are skipped to avoid recursive recording.

Session lifecycle

before_agent_start — Creates a session in the worker.
before_prompt_build — Fetches the observation timeline and returns it as appendSystemContext. Cached for 60s.
tool_result_persist — Records observation (fire-and-forget). Tool responses are truncated to 1000 characters.
agent_end — Sends the last assistant message for summarization, then completes the session. Both fire-and-forget.
gateway_start — Clears all session tracking (session IDs, context cache) so agents start fresh.

Observation feed

A background service connects to the worker's SSE stream and forwards new_observation events to a configured messaging channel. The connection auto-reconnects with exponential backoff (1s → 30s max).

Troubleshooting

Problem	What to check
Worker health check fails	Is bun installed? (`bun --version`). Is something else on port 37777? (`lsof -i :37777`). Try running directly: `bun plugin/scripts/worker-service.cjs start`
Worker started from Claude Code install but not responding	Check `cd ~/.claude/plugins/marketplaces/thedotmack && npm run worker:status`. May need `npm run worker:restart`.
Worker started from cloned repo but not responding	Check `cd /path/to/claude-mem && npm run worker:status`. Make sure you ran `npm install && npm run build` first.
No context in agent system prompt	Check that `syncMemoryFile` is not set to `false`. Check that the agent's ID is not in `syncMemoryFileExclude`. Verify the worker is running and has observations.
Observations not being recorded	Check gateway logs for `[claude-mem]` messages. The worker must be running and reachable on localhost:37777.
Feed shows `disconnected`	Worker's `/stream` endpoint not reachable. Check `workerPort` matches the actual worker port.
Feed shows `reconnecting`	Connection dropped. The plugin auto-reconnects — wait up to 30 seconds.
`Unknown channel type` in logs	The channel plugin (e.g., telegram) isn't loaded on your gateway. Make sure the channel is configured and running.
`Observation feed disabled` in logs	Set `observationFeed.enabled` to `true` in your config.
`Observation feed misconfigured` in logs	Both `observationFeed.channel` and `observationFeed.to` are required.
No messages in channel despite `connected`	The feed only sends processed observations, not raw tool usage. There's a 1-2 second delay. Make sure the worker is actually processing observations (check http://localhost:37777).

Full Config Reference

{
  "plugins": {
    "claude-mem": {
      "enabled": true,
      "config": {
        "project": "openclaw",
        "syncMemoryFile": true,
        "workerPort": 37777,
        "observationFeed": {
          "enabled": false,
          "channel": "telegram",
          "to": "123456789"
        }
      }
    }
  }
}

Field	Type	Default	Description
`project`	string	`"openclaw"`	Project name scoping observations in the database
`syncMemoryFile`	boolean	`true`	Inject observation context into agent system prompt
`syncMemoryFileExclude`	string[]	`[]`	Agent IDs excluded from context injection
`workerPort`	number	`37777`	Claude-mem worker service port
`observationFeed.enabled`	boolean	`false`	Stream observations to a messaging channel
`observationFeed.channel`	string	—	Channel type: `telegram`, `discord`, `slack`, `signal`, `whatsapp`, `line`
`observationFeed.to`	string	—	Target chat/channel/user ID

Installation

Skill body

Claude-Mem OpenClaw Plugin — Setup Guide

Quick Install (Recommended)

Install with options

Manual Setup

Step 1: Clone the Claude-Mem Repo

Step 2: Get the Worker Running

Check if it's already running

If Claude Code has claude-mem installed

If there's no Claude Code installation

Step 3: Add the Plugin to Your Gateway

Config fields explained

Step 4: Restart the Gateway and Verify

Step 5: Verify Observations Are Being Recorded

Step 6: Set Up the Observation Feed (Streaming to a Channel)

What you'll see

Pick your channel

Telegram

Discord

Slack

Signal

WhatsApp

LINE

Add it to your config

Restart and verify

Commands Reference

/claude_mem_status

/claude_mem_feed

How It All Works

System prompt context injection

Observation recording

Session lifecycle

Observation feed

Troubleshooting

Full Config Reference

Related skills

Skill body

Skill body

Claude-Mem OpenClaw Plugin — Setup Guide

Quick Install (Recommended)

Install with options

Manual Setup

Step 1: Clone the Claude-Mem Repo

Step 2: Get the Worker Running

Check if it's already running

If Claude Code has claude-mem installed

If there's no Claude Code installation

Step 3: Add the Plugin to Your Gateway

Config fields explained

Step 4: Restart the Gateway and Verify

Step 5: Verify Observations Are Being Recorded

Step 6: Set Up the Observation Feed (Streaming to a Channel)

What you'll see

Pick your channel

Telegram

Discord

Slack

Signal

WhatsApp

LINE

Add it to your config

Restart and verify

Commands Reference

/claude_mem_status

/claude_mem_feed

How It All Works

System prompt context injection

Observation recording

Session lifecycle

Observation feed

Troubleshooting

Full Config Reference

Related skills